Natural Rubber Slurry Pump 3 Inch for Corrosive and Erosive Slurries
Introduction:
1. Shaft Sleeve:
A hardened, heavy duty corrosion-resistant sleeve with O ring seals at both ends protects the shaft. A slip fit allows the sleeve to be removed or installed quickly.
2. Gland Shaft Seal:
A packed gland type shaft seal is also available and can be fitted with a low flow or a full flow flush seal water arrangement.
3. Centrifugal Shaft Seal:
A large percentage of duties allow the use of the WAR-MAN centrifugal seal which eliminates the need for sealing water.
Specifications:
| Model | SHR-75D |
| Outlet | 3-inch |
| Capacity | 79.2-180m3/h |
| TDH | 5-34.5m |
| Rated Motor Power | 60Kw |
| Speed | 800-1800r/min |
| NPSH | 3-5m |
Typical Applications:
Tailings
Heavy Mining
Ash Handling
Cyclone Feeds
Pulp and Paper
Corrosive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Heavy Refusal Removal
Standard Material of Wet-end Parts: Natural Rubber
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃ |
Performance Curve:
| Type | Size | Frame | Impeller:D3147 | Shaft Seal | Frame Rating(kw) | Normal Max Speed(r/min) | Max Passage Size(mm) |
| R | 75 | D | 5 Closed Type Rubber Vans, Diameter:245mm | Gland Packing, Expeller, Mechanical Seal | 30 | 1800 | 28 |
| SHR Series Rubber Lined Slurry Pump Specifations & Prices |
| |
Pump
Model | S×D
(inch) | Allowable
Max. Power
(kw) | Material | Clear Water Performance | Impeller | Pricing |
| Capacity Q | Head
H(m) | Speed
n(r/min) | Max.Eff.
η% | NPSH
(m) | No. of
Vanes | Vane Dia.
(mm) | Weight
(kg) |
| Impeller | m3/h | l/s |
| SHR/25B | 1.5×1 | 15 | Rubber
() | 10.8-25.2 | 3-7 | 7-52 | 1400-3400 | 35 | | 3 | 152 | 77 |
| SHR/40B | 2×1.5 | 15 | 25.2-54 | 7-15 | 5.5-41 | 1000-2600 | 50 | 2.5-5 | 5 | 178 | 104 |
| SHR/50C | 3×2 | 30 | 36-75.6 | 10-21 | 13-39 | 1300-2100 | | 2-4 | 213 | 154 |
| SHR/75C | 4×3 | 30 | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3-5 | 245 | 236 |
| SHR/75D | 4×3 | 60 | 245 | 290 |
| SHR/100D | 6×4 | 60 | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3-5 | 365 | 454 |
| SHR/100E | 6×4 | 120 | 365 | 635 |
| SHR/150E | 8×6 | 120 | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 510 | 982 |
| SHR/150F | 8×6 | 260 | 510 | 1390 |
| SHR/150R | 8×6 | 300 | 510 | |
| SHR/200F | 10×8 | 260 | 540-1188 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | 686 | 2581 |
| SHR/200ST | 10×8 | 560 | 540-1188 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | 686 | 3130 |
| SHR/250F | 12×10 | 260 | 720-1620 | 320-700 | 13-14 | 300-500 | 79 | 3-8 | 762 | 2807 |
| SHR/250ST | 12×10 | 560 | 720-1620 | 320-700 | 13-14 | 300-500 | 79 | 3-8 | 762 | 3357 |
| SHR/300F | 14×12 | 260 | 1152-2520 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 965 | 4123 |
| SHR/300ST | 14×12 | 560 | 1152-2520 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 965 | 4672 |
Construction of SHR Rubber Pumps:
1. Frame Plate 2. Expeller Ring
3. Packing Gland 4. Shaft Sleeve
5. Expeller 6.Frame Plate Liner
7. Impeller 8. Cover Plate Liner
9. Cover Plate
Product Tags:
|
|
Natural Rubber Lined Slurry Pumps 3 Inch for Corrosive and Erosive Slurries Images
|
